壁挂式斜角铅笔整理架

Wall mountable angled pencil organiser

2024-04-11 18:19:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked the Angled Pencil Organiser created by TakingFire but there were two main things I really wanted it to do. One I wanted to be able to store starpie pens and markers and some of my larger diameter pens, and two I wanted to be able to wall mount it in my garage so as to keep it off the desk but still retain the ability to take it off the wall easily so as to use it in any other parts of the garage.

Unfortunately I had trouble with the step files (or maybe its just my lack of knowledge working with them) so I rebuilt the entire design from the ground up. I have attempted to keep the dimensions "the same" but it would be not surprise to me if they are slightly different.

Just like the original the tolerances on the angle holder and the wall mount are "exact" and came out nice on my Ender 5S1 running on Klipper.

The holes are as follows:

5x 14mm
6x 8mm
2x 16.8mm
1x 16.5mm x 43.5mm
1x 24mm x 43.5mm

Print Time:

Pen holder: ~5h 30m
Base: ~1h 15m
Wall Mount: ~1h 10m

Print settings used:

Brim or Raft: No

Support: Yes for the over hanging part of the pen holder (organic tree support recommended set to branch angle of 50 degrees and on build plate only, you will need to paint the supports on the overhang)

Infill: 15% Triangles (you can change this per part to improve print time) Note I struggled with surface on the base because of the rake angle, higher infill may have helped with this.

Layer height: 0.2

Walls: 3 (you may want to add a modifier for the wall mount to increase walls for the pegs to make them stronger)

Bottom Layers: 3

Top Layers: 3

Post Processing: Just removal of the tree support