乐高‘协和’3M壁挂式 —— 3M指令胶带

Lego Concorde 3M Wall Mount -- 3M Command Tape

2024-05-02 04:55:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hey y'all! I remixed this model from another wall mount for the Lego Concorde #10318. I didn't want to have to drill into my wall to mount this set, so I decided to use the tape from 3M Command hooks. I am using two large stickers (each can support 5 lb) to hold a total of 10 lb of weight. The LEGO set is just over 7 lb.

Be sure to print in ABS though, as the set is heavy and could break this print if printed in PLA or a similar weaker material.

Also recommend using high infill such as 33% and increasing # of walls to about 5.

Enjoy!!!

(Also don't worry about the weird black squares on the rendered image of the model, if you enter 3D mode you will see those squares aren't actually present)

乐高‘协和’3M壁挂式 —— 3M指令胶带

朋友，你觉得上面这个模型，属于下面的哪个分类？