SD卡数据芯片/模块

SD Card Data Chip / Tile

2024-03-26 21:50:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a set of tiles to hold individual SD cards and a rack to hold 10 of the tiles.

I wanted something the was harder to lose and had space for a decently sized label.

I printed all items with a 0.6mm nozzle and the press fit works really well. a vice or a gentle tap with a hammer will seat joins well without glue. The dovetail may toke some work. I had success drawing on the contacting faces with pencil to lubricate the joint and using a vice to gently slide the parts together. A standard 0.4mm nozzle may give better results.

There are a variety of designs.

MICRO tagged files are for the micro SD cards, they are press fit only.
DOVETAIL tagged files are for SD cards and slide together.
RACK tagged files are racks for holding the tiles.
V3 tagged items are for SD cards and are press fit only, one top is blank the other is not.