ESP32-CAM固定盒

Mounting case for ESP32-CAM (+ESP32-CAM-MB board)

2024-05-02 13:52:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This thing combines features from the two things it is a remix of.

Here is an English translation of the description ofDer_Erbauer'sthing:

This housing is specially designed for the ESP32-CAM module with USB adapter shown.
The buttons on the USB adapter are not exposed.
The camera itself is housed in a 9x9x1mm recess in the housing, so that the focus can be adjusted from the outside. I chose the cutout for the USB connection cable so that a plug measuring 11.5x8mm can also be used.
The two ESP32 modules available to me fit into the housing without any play and are held securely in the housing by the tight-fitting cover.
Light effort is required to close or open the lid, which makes screwing or gluing unnecessary.

This remix removes the clip-in flanges/tabs and associated recesses from that original to make it easier to print. The press fit is good enough without them.

The tab on the bottom (mostly taken straight from https://www.thingiverse.com/fuweissinger'sthing) makes this case compatible with the popularEnder 3 camera mounting systembyCodemonkey1973(which was originally designed for a RPi camera).