3D打印可制作的可见红外光谱仪

3D-printable VIS-IR spectrometer

2024-04-11 09:44:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A spectroscope for UV-IR spectrometry.

I used an ELP USB-camera with and adjustable lens (this brand, they also have an Alieexpress store: https://www.webcamerausb.com/) and a piece of a broken CD as a diffraction grating. In order to see infrared, make sure your camera doesn't have an IR filter. The camera housing is taken apart and attached to the spectroscope using the front panel. The CD is held in place with a holder that can be rotated to any angle using an M2 screw. I recommend inserting a brass insert into the CD holder for this purpose as well. The entrace is a 0.8 mm slit, that can be narrowed using slit inserts down to 0.1 mm. A Toslink optical cable can be attached to the ligt entrance to make pointing at a light source easier.
I uploaded a version with a 25 degree angle between camera and slit, and a version with a 35 degree angle between the camera and slit ("increase angle").
I also uploaded the FreeCAD files if you want to make adjustments. I'm still a novice at CAD, so they aren't the easiest to modify though.

I reccomend the user-friendly software Theremino Spectrometer to interpret the spectra: https://www.theremino.com/en/downloads/automation (scroll down on this page until ou see the spectrometer section)

If you want to try VIS-IR absorption spectrometry, I recommend downloading this cuvette holder from Gaudilabs which works with the same Toslink cable: https://github.com/GaudiLabs/3DFiberSpectrometer/tree/main/CuvetteHolder/STL

The spectrum in the images is from a neon bulb.

Print Settings

Printer:
QIDI X-Maker
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.24
Infill:
Doesn't really matter
Filament brand:
Whichever
Filament color:
Matte black to minimize internal reflections
Filament material:
PLA
Notes:
Make sure you have a level bed and the correct Z-distance when printing the 0.1 mm slit insert, otherwise the slit will close due to elephants footing of the print.