挂钩板固定架适用于Steam Deck
Pegboard mount for Steam Deck
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a simple pegboard mount for your Steam Deck.
My pegboard has holes that are 7mm diameter and spaced 1 inch (25.4mm) apart.
The brackets are designed to fit the steam deck in between the hand grips (see photos). You need to print at least two brackets, but you could use more if you wanted to provide more support.
Use this design at your own risk! I am not responsible for damage to your Steam Deck.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:Yes
- Resolution:.3mm
- Infill:40% gyroid
- Notes:
Brackets should be printed on their sides. You need supports for the pegs, but this is otherwise a very straightforward print that didn't give me any trouble.
I used 3 walls and 40% gyroid infill in order to strengthen the pegs as much as possible.
Layer height doesn't matter, so I went with .3mm to increase the print speed.
License
Pegboard mount for Steam Deck
by frankpx is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Raspberry Pi外壳2023-03-27 -
Wled控制器箱2023-08-25 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
自行车钥匙扣2024-01-05
最热下载
-
车身RC 1/10 全套2023-03-26 -
Makita 10.8V 钻具与电池组2023-04-07 -
斯坦利杯2024-01-11 -
PaTS轮子2024-04-29 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
一体打印活动关节熊猫和支架2025-07-25 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
比基尼模型2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24