QIDI Tech 辅助侧风扇护罩

QIDI Tech auxiliary side fan guard

2024-03-31 10:11:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This part prevents print debris from getting into the auxiliary fan on the side. Designed for X-Plus3, but should also fit X-Max3.
PETG or ABS is recommended; avoid PLA. 3-pattern designs are available, as well as a no-mesh type for designing your own mesh part. I recommend the gyroid infill mesh one with modifier. It is printed on the reverse side as I like the finish with the texture of the bed transferred.
The clearance between the bed and the fan is very tight, so be sure to insert the pins completely all the way to the back.

Print with a layer height of 0.2mm.
To print the gyroid infill mesh type, Set the infill type to gyroid and density to 25%. load “QIDISideFanguard_Solid.stl” into the slicer and load “QIDISideFanguard_modifier.stl” as the modifier. Set 0 top and bottom solid layers in the modifier settings. This leaves the infill bare and functions as a mesh.