微瑞士 NG 双吹风 5015 外壳部件

Microswiss NG Dual 5015 blower shround

2024-03-19 19:10:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Been using this for a while now. and am able to mainain 80 degree overhangs with no support using this setup running the fan at 45-65%.

I made mine out of Nylon and it takes the heat radiated from a 110 degree heated bed no problem.

You will need 4 M4x25mm button head screws and 4 M4 nuts to secure the fans to their mounts.

Also required is a M3 12mm button head screw and nut for the right side screw mount to the backplate. Screw it on from the opposite side of the backplate, mount the shroud and use a M3 nut to secure the right side of the shroud.

The left side screw goes in as per the original shroud.

i printed the version i am using now using .2mm layer height and 40% gyroid infill, but when i was running test prints during the iteration process of designing this, .32 layer height and 25% infill came out just fine.

Might pay to print this a bit slower than normal, you know your printer better than me, but i got best results when slowing it down

Take care when slicing. Support blockers should be placed on the internal cavity of the part blower all the way. to the opening. I got the best results using tree supports.