轮廓磨损棒，适用于1/10巡航车和RC漂移车体模型

Wheel Arch Sanding Block for 1/10 touring and RC Drift bodies

2024-03-14 16:28:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a wheel arch sanding block, design to smooth the cutting of the wheel arches of 1/10 RC car bodies (touring or drift). The diameter is 72mm, to fit almost all.
If you need additional sizes, please leave a comment.

How-to

You will need a piece of sandpaper, 5 centimeters wide and 30 centimeters long.
Then, insert the sandpaper in the tool, and improve the your brand new RC body!

Quality first

Optimized for 0.4mm nozzle and 0.2mm layer height.
Easy to print.
No support needed.
Compatible with classic printers like Ender 3.

Buy me a drink!

If you would like to send me a tip to support my creations, click on the link: https://ko-fi.com/espelir Your donations are highly appreciated and will be used to build new prototypes, and buy coffee for difficult mornings with Fusion360.

Kind regards from France!