狗用胶带发射器

Doggy Tape Dispenser

2024-03-14 06:17:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Dispenser for 50 mm packaging tape (up to 120 mm diameter) or any other tape under that range of dimensions.

Model TD1 is prepared to fit a steel blade-saw like https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1

Model TD2 is prepared to receive a printed blade-saw made of PLA. Print this part in 0.12mm layer (PLA blade can be glued or screwed)

You will just need a screw (WS) 3,5 x 25 mm for the movable lid and 2 short screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).

Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
15
Notes:
0.2mm layer height
Support: tree slim/threshold angle 26 (but with Normal Snug works too)
6 top shell layers

Tags

ergonomic grip glue Handy holder packaging tape dispenser

License

CC BY-NC-ND

Doggy Tape Dispenser
by CasaPrint3D is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.

狗用胶带发射器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

斯坦利杯
2024-01-11
佳能EOS镜头连接接口
2024-01-11
Fifine AM8冲击挂钩
2024-03-26
Ikea 米兹顿插嵌
2024-04-20
PaTS轮子
2024-04-29

最新模型