Flashforge Adventurer 5M摄像头/网络摄像头安装架

Flashforge Adventurer 5M Camera/Webcam Mount

2024-02-05 17:36:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mount for a USB webcam to act as the monitoring camera of the AD5M since it doesn't come with one. I found a webcam that I had no use with and wondered if FF's firmware supports it, and realized that since it's based on Klipper, any USB webcam that clamps on top of a monitor will work for this machine. So I designed this mount to let the camera clamp in place without interfering with the tool head.

A tiny bit of support may be needed at the pin.

The pin goes into the hole next to the screen, on the right side of the printer. To make it fit in the middle hole, just simply mirror the part in your slicer and your camera should be centered. Same thing applies if you prefer mounting your camera on the left side of the printer.

Let me know if you need mounts of other height or width.

Happy printing and don't forget to share your makes!