Gundam 1/144 站立模型

Gundam 1/144 Stand

2024-02-04 13:06:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a custom Gundam 1/144 stand that requires very few supports, and relies on the friction of the M3 nuts and bolts

The long arm section should be laid down flat, with the holes being perpendicular to the ground, and it should not use supports

The base should lay flat with the holes facing up, the hinge piece that connects into the base needs to be oriented so the flat section lays flat, and this is the only piece that needs to the supports.

The actual piece that connects to the Gundam itself can be placed upright, with the peg sitting at a 45 degree angle (Flip it upside down compared to the thumbnail of the part).

I have attached photos of the Gundam WFM line, including Guel's Dilanza and Lfrith Ur

Hardware needed:

3x M3x12 Bolts
3x M3 Nuts

Please note: due to the wildly varying printer settings people have, I can say with a high degree of certainty that you will probably need a bit of sanding on the connection points to make it easy to pose.