T-槽式Raspberry Pi 4固定座

T- Slot Raspberry Pi 4 Mount

2024-02-04 13:06:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really hate wires hanging all over the place, so I wanted to move my raspberry pi inside the case of my Artillery Sidewinder X1. So the first step was to design a mount for the Raspi to mount in my case and I did I then found out that I needed a fan for the pi to keep it cool while it wasn't printing. The fan mount misses the case fan and does not interfere with it.

Job was a success, then I hated the power wire coming through a grommet in the back. I figured I could use a buck converter to power the pi and it worked like a charm. Now for the usb ports I got ones for a boat from Amazon and mounted them on the side of the case right beside the air vent Now I can plug in 2 cameras if I want.

Almost nothing about this printer is stock anymore so I didn't have any feelings about drilling a 1" hole in the side of the case.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
.28
Infill:
10%
Filament brand:
Iboss
Filament color:
Red
Filament material:
PLA +
Notes:
I made 2 mounts for T-Slot extruded rails. 1 Over hangs the rail so that wires can go between the mount and extruded rails. The other one flush mounts to the rail. The fan mount is interchangeable from one mount to the other.

I used M3 threaded inserts with M3 Button head cap screws for most and socket head cap screws for the rest.