Reolink RLN8-410 1U Rack Mount Ear

Reolink RLN8-410 1U rack mount ear

2024-01-16 02:05:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This print will create a right side rack ear for a Reolink RLN8-410 POE NVR. You need to mirror the print in your slicer to create the left side rack ear.

To install the rack ears, longer screws stock are required to affix the rack mount ears to the screw holes used to fasten the top panel to the unit. You will need the following:

Four "4-20 x 1/2" screws
Four "#4" washers

Once printed, simply remove the original four side screws, position the printed rack ear over the top, align the holes, and fasten securely to the unit.

Use your standard rack mount screws to attach assembled unit to 19" equipment rack.

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
Yes
Supports:
No
Infill:
40%
Filament brand:
GST3D
Filament color:
Any
Filament material:
PLA+
Notes:
Notes:
- This is for the right side mount. To print the left side mount, create a mirror copy of this .stl file in your slicer and print both at the same time.
- The Reolink RLN8-410 NVR is about 5mm taller than a standard 1U rack mount space due to unfortunate protrusions at the bottom of the unit for the desktop feet. These rack ears will work if you have a free space in your rack underneath the NVR unit. or if there is a partial height item racked below
- 40% infill with PLA seems to be quite stiff. You can play with a higher infill percentage, but I don't think it's required.