50mm磁性线加速器模型

50mm Magnetic LINAC Model

2024-01-11 17:20:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The basis of this remix is the Linear Accelerator visualisation aid by countrybunker on Thingiverse: https://www.thingiverse.com/thing:1804228

This 50mm wide version has been modified from the above.
The Couch requires gluing to the Turntable.
Each 50mm LINAC model requires 4 x 8x3mm neodymium magnets for articulation of Gantry and ColHead.

Print orientation recommendations:
Wall_and_Floor: on its back (no supports needed)
Turntable: right side up (no supports needed)
Couch: on its back (no supports needed)
Gantry: on its back (SUPPORTS REQUIRED)
ColHead: upside down (no supports needed)

Support recommendations:
Gantry (on its back): recommend double walled organic supports.
1) on Panel and Source.
2) on bottom center of where each arm connects to gantry.
3) within hole for magnet at back of gantry that is now on build plate.

Printed in Overture PLA, 0.12mm layer height.

50mm磁性线加速器模型

朋友，你觉得上面这个模型，属于下面的哪个分类？