强大的机器人：可变形打造原地制造工艺

Mighty Orbots Posable Print-in-place

2024-01-09 21:07:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Go Mighty Orbots! Mighty Orbots (マイティ・オーボッツ, Maiti Ōbottsu) is a 1984 Super robot animated series created in a joint collaboration of TMS Entertainment and Intermedia Entertainment in association with MGM/UA Television. It was directed by veteran anime director Osamu Dezaki and features character designs by Akio Sugino. The series aired from September 8, 1984, to December 15, 1984, on Saturday mornings in the United States on ABC

Print Settings

Printer brand:
Anycubic
Printer:
Photon Mono X
Rafts:
No
Supports:
No
Infill:
solid
Filament brand:
doesn't matter
Filament color:
doesn't matter
Filament material:
resin
Notes:
For filament printers:
Printing temperature: 200 °C
Bed temperature: 50 °C
Speed: 50 mm/s
Layer height: 0.08 mm
Shell thickness: 0.80 mm
Retraction: 6 mm @ 25 mm/s
Infill: 50%
Initial layer speed: 20 mm/s
Initial fan speed: 0%

Initial layer thickness: 0.20 mm, 0.24 mm
Initial layer speed: 30 mm/sec, reduce further if you have problems
Number of slower layers: 5
Initial fan speed: 0%

If this makes you happy, feel free to throw me a tip at PayPal.Me/SMunger37

Set support infill to 5% and ZERO walls and it will come off easier.
or
Turn on support interface at 2mm thickness and 50%