Sauder衣柜抽屉轨道支撑架

Sauder Dresser Drawer Rail Bracket

2024-01-07 02:16:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This was used to replace broken brackets on a Souder Dresser and nightstand. Image of the Brown bracket shows the piece that I was replacing.

Due to the fact that the Bracket must be placed at a particular location on the furniture, I added 2 additional screw holes towards the middle this will help in the instance that the existing holes in the wood can no longer hold a screw. Those two holes do line up with the holes on top so they can be screwed in through those holes (if you have a screwdriver with less than a 5mm shaft.)

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Supports:
No
Resolution:
.2
Infill:
20-30%
Filament brand:
Matterhacker
Filament color:
White
Filament material:
PETG
Notes:
I tested several Infill settings. 20% is the lowest that i would use especially if you have a tendency to over fill the drawer.