Ende者S1 Pro型号风扇罩升级

Ender S1 Pro Fan Shroud upgrade

2024-01-07 00:07:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

So the cooling fan/mount on the S1 pro is horrible. Here is a very simply upgrade,
Simply remove the fan, flip the stainless steel bracket 180 degrees and mount back with two of the mounting holes.

Obviously after you have printed and replace the fan shroud.

No need to upgrade any fan, just make sure you undo the cable relief behind the fan and it will still reach the connector port as expected.

You will see once the new shroud is in place the nozzle is slightly off center. this is expected. one port of the shroud points at the printed point, and the other at the area just off the side. meaning the melted plastic gets blast of air just as its laid down, and another blast when head moves past that point.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.2 or 0.28
Infill:
100%
Filament brand:
Generic
Filament color:
black
Filament material:
PLA
Notes:
Print on fan vent ports like image below with Brim, I didnt need support but you might.