Tensegrity反叛桌更新

Tensegrity Rebel Table update

2024-01-06 20:17:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

i added vertical tabs to attach the string. and i made small pegs for this.
NOTE - this peg is about 2.2 mm; the original hole i created is 3mm, but i scaled it to 80% when printing. so the peg needs to be custom size to your scaling.

the peg allows string/filament/fishline/etc to be put into the vertical holes top and bottom, and pegged in place, easier than tying, and you can make three pieces more exact in length.

NOTE, i did not make a peg for the center hole, i inadvertently did not calculate it when doing my pins. (easy enough to do if needed), but not too bad to attach and tie center sstring first, as the outer strings are the more finicky.

thanks to original designer !

Tensegrity反叛桌更新

朋友，你觉得上面这个模型，属于下面的哪个分类？