点击计数器抓焦玩具

Clicky counter fidget

2024-01-05 01:41:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A small fidget with exposed mechanism. It advances a single-digit dial by one with a satisfactory click upon being pressed:

(If you prefer a .webm video with controls and sound rather than a 1980's .gif, go here.)

The model consists of three parts: a base plate, a dial and a bolt to keep the dial in place. Note that the bolt has left-handed thread (so that the dial fastens it upon rotation).

By design there is no indication which digit is currently ‘selected’; you can either draw an arrow (e.g., on the bolt) after assembly, or you can assume one position to be the right (e.g., that the digit which is fully over the base plate is ‘selected’).

This model was designed for PET-G. Using a different material might change the force needed to advance the dial. No supports shall be used.
I used 0.5mm nozzle and 0.2mm layer for draft prints, and the fidgets work fine, yet the digits came out badly.
With 0.25mm nozzle (and 0.1mm layer) the digits look nice.

The STL files were generate using the Scriber Bold Stencil font available free of charge for personal use here. The .stl models use that font, hence the non-commercial license (CC-BY-NC-SA).
The .scad and .dxf files themselves are CC-BY.