钥匙扣展示架

Keychain display stand

2023-08-26 18:45:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is my display design for keychains and other small items.

Two parts are included in the folder: the first, i.e. the keyring display, measures 180 mm long x 100 mm wide x 35 mm high. The second is instead the pedestal, which measures 99 mm long x 104 mm wide x 15 mm high

The two parts can be printed flat on the plate, so they don't need supports. After that you can easily assemble them without the use of glue or anything else.

You can also print only the first part (the one where to put the keychains) and hang it vertically on a support thanks to the upper ring (as shown in the second image)

The nice keychain tortellini you see in the first image are always my creation and you can find the 3d model on Cults3d at this link: https://cults3d.com/en/3d-model/jewelry/cute-tortellini-keychains

Enjoy ;)

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega X
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100
Filament brand:
GEEETECH
Filament color:
wood
Filament material:
wood pla

Tags

display display stand espositore holder jewelry keychain keychains no support portachiavi

License

CC BY

Keychain display stand
by fedeluca89 is licensed under the Creative Commons - Attribution license.

钥匙扣展示架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
佳能EOS镜头连接接口
2024-01-11
管道旋转过滤器（160mm）
2024-03-19
PaTS轮子
2024-04-29
瑞克·阿斯泰利低面数模型
2024-05-06

最新模型