200mm天文望远镜部件（Orion Xt8型号）

Part for a 200mm telescope like Orion Xt8

2023-08-25 05:11:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Looking at doing a goto version of my orion xt8 and using this. Had to fix original so it would open in tinkercad as there were some mesh errors. The orion xt8 side is the origional part, the smaller gear is Orion Xt8 smaller gear

I reduced the size of the gear to fit in space of the xt8. Printed the Orion xt8 side and found it to be too small a diameter. Looks like the original was made for 200mm outer diameter scope and the XT8i is 235mm. So redid it and created the Orion Xt8 side 90 teeth 1.6 module pressure angle 20.stl which I also printed and it seems like it will fit much better. Will post images when I connect to scope. The 2 holes on the sides needed to be drilled a little as they need to be 6mm.