清洁机械
Cleaning Scraper
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Cleaning Scraper
Blade Size: 100x18mm
Scraper Size: 110mm wide, 150mm long
All parts except for the blade are printed using PETG.
After inserting the blade, slide in the cover, pinch the cover and base, align the holes, insert both limiters into the bottom, and lock the blade and entire scraper in place.
Install the mask with the text facing up.
I recommend printing with PETG at a layer height of 0.1mm and 50% infill.
The limiters and mask should be laid flat, and note that there is a flat surface for them to rest on.
No supports are needed.
Tags
License
Cleaning Scraper
by SSSR_SH is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
可互换的米老鼠耳朵2023-06-24 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
Arduino继电器模块外壳2024-01-14
最热下载
-
车身RC 1/10 全套2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Makita 10.8V 钻具与电池组2023-04-07 -
斯坦利杯2024-01-11 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
鞋带锁2025-07-17 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24