Hygrometer Mount for Sunlu FilaDryer S1 Plus
Summary
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware needed.
Notes:
I have used the following hygrometers:
https://www.amazon.com/gp/product/B0CMTNLK2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0C74T4JH1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Both fit nice and snug. One batch did have a slight burr on the side flange so it couldn't be inserted, but the burr was easily/quickly removed with a file.
If purchasing a different model make sure it can read down to 10% as some hygrometers only go to 20%.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Supports:Yes
- Resolution:0.20
- Infill:15%
- Filament brand:
Sunlu
- Filament color:
Transparent
- Filament material:
PLA
Tags
最新T站
-
F1 race boat fixed files2024-05-08 -
MBX5 Battery and ESC Tray2024-05-08 -
Wire Frame - Airless Heart2024-05-08 -
Double Chompy (blackout curtain clip)2024-05-08
