玻璃研磨机第二版本

Summary

Printed upside down with supports touching build plate. I used 30% infill for strength, but less is probably fine too.

There is space for a small L-shaped sponge in the reservoir, I just cut mine from regular kitchen sponge. I used 5mm dowels stuck in the grid of my grinder all around the print to keep it in place, feel free to remix with a better solution!

Print Settings

• Printer brand:

  Creality

• Printer:

  Ender 3

• Rafts:
  Doesn't Matter
• Supports:
  Yes