Emax Tinyhawk 2 Freestyle RunCam摄像头固定装置
Emax Tinyhawk 2 Freestyle RunCam Thumb Mount
2024-05-03 22:17:04
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I tested lots of different Mounts for the RunCam Thumb on the Tinyhawk 2 Freestyle, but didn't like any. So i designed one myself.
Hope you like i too.
The parts have to be rotated before printing, my 3d Software doesn't export the parts in the right orientation. The Mount and the Case should be printed flat on the bed and the rear battery tray should be printed standing.
PS: The mount should also fit a GoPro, but i didn't test it.
Tags
License
CC BY-NC-SA
Emax Tinyhawk 2 Freestyle RunCam Thumb Mount
byMiKe9292is licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi外壳2023-03-27 -
Wled控制器箱2023-08-25 -
自行车钥匙扣2024-01-05 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
Makita 10.8V 钻具与电池组2023-04-07 -
佳能EOS镜头连接接口2024-01-11 -
手指机器人MX版2024-04-14
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
鞋撑2025-07-17 -
3d打印的男人凉鞋2025-07-17 -
高跟鞋鞋架2025-07-17 -
裸女站立2025-07-16