SanDisk极端SSD NP-F电池壳安装展示

Sandisk Extreme SSD mount on NP-F Battery Cover

2024-05-02 02:18:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I merged the Sandisk Extreme external SSD mount on the NP-F Battery cover slot remix. I had to widen the Sandisk mount, because my 1TB drive must be a different model number. The original was slightly too small. I also closed part of the bottom to hold the ssd a little better, but added an opening to the left for the USB C cable. Then I added a fillet to the bottom edge.

First I tried to line the top of the battery cover to the inside of the mount for a lower profile, but it would not fit in the battery slot on my Blackmagic Assist 12G 5".

This is remixed withhttps://www.printables.com/model/382836-np-f-battery-cover-slot-remix, which is a remix of the battery slot cover listed in this remix.

SanDisk极端SSD NP-F电池壳安装展示

朋友，你觉得上面这个模型，属于下面的哪个分类？