M8前面板改进版

M8 front cover modified

2024-05-01 22:12:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Love the front cover by deathwegen. Decided to remix it by providing holes at the top to be able to see the Audio, USB, and MIDI labels. Also created small notches on the sides for the power button and micro sd card slot. Default thickness is 2mm, but I printed it at 1.5mm and it works great. Can use original screws that comes with the M8.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament brand:
Hatchbox
Filament color:
Pink
Filament material:
PLA
Notes:
- skirt
- 2 bottom layers
- 4 top layers
- enable ironing on highest layer (smooths out the layer lines)
- print temp 200C
- bed temp 60C
- print speed 70 mm/s
The model default is 2mm thick, but in your slicer you can scale the Z dimension down to 1.5mm (make sure you turn uniform scaling off).