EZViz室内全景摄像头支架

EZViz Indoor Pan & Tilt Camera Holder

2024-04-30 05:24:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If you have your EZViz pan & tilt camera on a high shelf, you'll find that most of its movement area will just show you the ceiling. This Thing lets you keep the EZViz camera on the high shelf but allows you to have it upside down, giving you a more useful visible area. You’ll need the original ceiling mount and three 15mm screws.

CameraHolder is the original that I printed.
CameraHolderThin_v2 is a thinner version.
CameraHolderThin_v4 uses hexagonal cut outs on the back. Please note that I made use of this SCAD library:https://www.printables.com/model/698467-hex-grid-scad-updated-to-allow-frame-wall-width-in/files.

The photos are of CameraHolder and CameraHolderThin_V4. I’ve tried this with a couple of different models. They all fit, it’s just some have more clearance than others.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3mm
Notes:
Print with the longest face as the base. This means you won't need supports.