带式紧固轮 - 惠普卡布里奥烘干机
Belt tensioner pulley for Whirlpool Cabrio dryer
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Got tired of the factory part constantly failing with the sleeve.
This replaces the pulley with a new one that can use a pair of standard Ball Bearings:
1/2"x1-1/8"x5/16" Ball Bearings (R8 2RS)- https://a.co/d/gY7GJW7
This fits the factory pulley shaft with a little cleanup. I cleaned it up with a little 120 grit sandpaper until the bearings fit snug.
I designed this so it can be printed without any supports.
I recommend printing with 80%+ infill with PETG.
I recommend packing extra grease in the space between the 2 bearings as you assemble it. I used white lithium grease which seems to work fine.
I include an stl file for a replacement retention clip, this fits tight and has the be pressed on flat.
I also include the 3d file so you can modify as needed.
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:80%
- Filament brand:
NA
- Filament color:
NA
- Filament material:
PETG
相关内容
联系我们
热门推荐
-
Raspberry Pi外壳2023-03-27 -
Dew Shield for Evoguide 50ED2023-08-07 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09 -
Arduino继电器模块外壳2024-01-14
最热下载
-
阿基米德风力涡轮机与发电机组合2023-07-25 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20 -
Fifine AM8冲击挂钩2024-03-26 -
Halo Reach巴黎级大型战舰2024-05-05 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
高跟鞋鞋架2025-07-17