1U服务器机架固定支撑架
1U Rack Server Bracket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This bracket allows for clamping a 1U Rack Server to a wall. It can be used in conjunction with feet that allow the server to stand vertically. The feed used in the picture can be seen here: https://www.printables.com/model/488354-1u-server-stand-from-rack-to-tower
This bracket was designed to work with the above feet so the server is spaced about 20mm off of the wall. It was also designed to work with the Dell PowerEdge R420, so if your 1U server is a bit thicker, you may run into some issues.
This can be screwed to a wall with M3 Screws.
Don't print this in the orientation it is in. Place it flat down on the print bed.
Print Settings
- Printer brand:
UltiMaker
- Printer:
Ultimaker 2
- Rafts:No
- Supports:Doesn't Matter
- Resolution:0.2
- Infill:20%
- Filament brand:
PolyMaker
- Filament color:
Grey
- Filament material:
PLA
相关内容
联系我们
热门推荐
-
可互换的米老鼠耳朵2023-06-24 -
Dew Shield for Evoguide 50ED2023-08-07 -
头发修剪架2024-01-10
最热下载
-
Phalanx S1 数字化STL文件 3D打印Nerf枪型号2023-03-26 -
车身RC 1/10 全套2023-03-26 -
阿基米德风力涡轮机与发电机组合2023-07-25 -
佳能EOS镜头连接接口2024-01-11 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
模块化笔筒链2025-07-19 -
鞋撑2025-07-17 -
私密羞羞娱乐骰子2025-07-15 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15