小米 HOTO Scredriver-Lite 磁吸壳

Xiaomi HOTO Scredriver-Lite Magnet Case

2024-04-22 16:47:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my implementation of the Xiaomi screwdriver case. Please note that the case was developed and tested for HOTO Screwdriver-Lite and was not tested on the higher version (although the higherversion already came with the case included).

To assemble this case, you will need 50 magnets 5x2mm (10 for the bottom plate, 10 for the base, 15*2 for the bit sockets). I used these from AE.

Before printing, please print Calibration Model.stl and make sure everything fits as expected(magnets, bits, screwdriver). If not, download the STEP file and fix everything for yourself. If you are using Fusion360, it is better to download HOTO Case.f3d file because it has a parameterization table and everything is rebuilt automatically.

Print Settings

Printer brand:
Two Trees
Printer:
Two Trees Sapphire Plus
Rafts:
No
Supports:
No
Infill:
15
Filament brand:
Filamentarno
Filament color:
Da red goes fasta
Filament material:
ABS GF4
Notes:
I printed everything with red ABS GF4 with a 0.4 nozzle 0.15 layer height.

For the best result, use 3 walls and 15% cubic infill(182g total).

The model is designed so that you don't have to use supports. If you are not sure about your bed adhesion, use brim.

Post-Printing

Magnets installation

Press all the magnets into place. They should fit tightly, not fall out under any circumstances, but also not tear the base and bottom plate. If the holes are too small, cracks and white areas will appear on the ABS.

MAKE SURE THAT ALL MAGNETS ARE INSTALLED WITH THE CORRECT POLE!