Audiofrog GB系列适配器适用于保时捷718

Audiofrog GB Series adapters for Porsche 718

2024-04-11 11:21:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For printing, use PTEG or Polycarbonate. Designed for use with nut inserts: uxcell knurled Insert Nuts, 100Pcs M4 x 4mm(L) x 6mm(OD) Female Thread Brass Threaded Insert Embedment Nut for 3D Printer https://a.co/d/asaAXBi

GB25 on 4in location: Use this for either surround location or front door midrange location when using GB25 speakers.
718 Audiofrog Tweeter: Use this to install the GB10 tweeters in tweeter location. You will have to take the current holder by cutting clips. You will need U-nuts and bolts.
Audiofrog GB25 Center: Use for center channel location when using GB25 speaker,
Audiofrog GB40 Rear install flat: Use this one to install the GB40 speakers at midrange location. The GB40 speaker must be installed on the rear of this adapter, so that the adapter is on the front for low profile. This will protect the speaker cone and will prevent the cone from colliding with the door panel.