活力四射

Peppy

2024-04-11 09:42:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

PROPERTY OF HOYOVERSE. USED WITHOUT PERMISSION.

i'm not sure i released Peppy anywhere since i made him a while ago... but here he is. this was one of my first resin prints but required few improvements. you can print him with no accessories or unhide the harness and/or jet pack in BLEND. objects in BLEND are set to 4xSS since its such a simple model.

the few modifications i made were, extending left paw closer to the ground with proportional editing and smoothing his snout just a bit. his tongue was also thickened for easier printing. he should be printable in FDM but RESIN is obviously preferred. actually, you might want to thicken the tongue just a bit more if you're printing FDM or just print bigger.

don't forget to hollow your STL in PrusaSlicer, and add a few holes (1.0 - 1.3mm diameter) to relieve the pressure.

enjoy!

this print is just under 10cm tall, so even old resin printers with smaller build volumes should have no problem printing him.

let's see some prints!