太阳滤镜单反相机持有架

Solar Filter Holder for DSLRs

2024-04-05 09:08:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a solar filter I quickly designed and printed for the total solar eclipse on April 8, 2024. It can slip over any lens 58 mm or smaller in diameter.

This uses one filter from a pair of solar viewing glasses. I cut the cardboard to match the inside diameter of the holder cap.

It's important to use black filament or to spray paint the body of the holder matte black to avoid letting in stray light. I painted it inside and outside before inserting the solar filter material.

I used drops of cyanoacrylate adhesive to hold all the parts in place.

This has been tested and works as well as the professional filter I purchased.

I made this design in case the one I ordered hadn't arrived in time.

Print Settings

Printer brand:
Voxelab
Printer:
Aquila X2
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament brand:
Creality
Filament color:
Any
Filament material:
PLA
Notes:
If you print it in any color other than black, spray paint it with matte black.