Magnetic Airtag Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Airtag case to hold both an airtag and magnet coaxially. It's designed for a 1" diameter magnet with a countersunk hole through the center. The hole in the case isn't threaded, so use a self threading screw. A threaded cap holds the airtag on. The threads are large, so high resolution isn't needed (0.2" layers works fine). No supports are necessary depending on the orientation you print in.
I've also included 2 sizes depending on the screw length you use.
I'd recommend using PETG if you plan on using this in any automotive application.
I used these magnets, and cut the screws down a bit:
https://www.amazon.com/dp/B0CDR3VW7P
Print Settings
- Rafts:No
- Supports:No
- Resolution:0.2
- Filament brand:
Any
- Filament material:
PETG
Tags
License
Magnetic Airtag Case
by lounl is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
可互换的米老鼠耳朵2023-06-24 -
老板螃蟹 KGC-0102023-09-08 -
自行车钥匙扣2024-01-05 -
Arduino继电器模块外壳2024-01-14 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
Makita 10.8V 钻具与电池组2023-04-07 -
管道旋转过滤器（160mm）2024-03-19 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
龙珠孙悟空，无需支撑2025-07-19 -
用于加长杆的戴森配件支架2025-07-17 -
巴黎卢浮宫的三圣母像2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24