帕克赛德湿用与干用真空吸管接头

Parkside wet and dry vacuum nozzle adapter

2024-04-03 23:04:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This facilitates a small, flexible nozzle for my Parkside PNTS1400 wet-and-dry vacuum cleaner. It fits on the end of the normal hose, and a 15mm o.d. flexible pipe pushes snugly into the other end. The holes for the hoses are slightly tapered for a close fit.

Please regard this as a starting point for your needs - you will almost certainly need to adjust the numbers in OpenSCAD to make it work for you.

The yellow nozzle adaptor is shown in the pictures because it was easier to photograph - in reality its dimensions were slightly too small, and it was printed in PLA. The final, black, version was printed in PETG for durability.

The size can be modified in OpenSCAD, but you will need one library: chamfer.scad

Alternatively you could try varying the size of the pieces in the slicer, if you don't want to deal with OpenSCAD - but the tapers may vary between brands.

Print Settings

Printer brand:
Anycubic
Printer:
Kossel Linear Plus
Rafts:
No
Supports:
No
Resolution:
Anything you like - I used 0.2
Infill:
20%
Filament brand:
Sunlu
Filament color:
Black
Filament material:
PETG
Notes:
Flip the part 180 degrees in the X or Y axis before printing, so that the small hole is downwards.