手臂稳定器

Hand Stablizer

2024-04-02 22:27:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Help soldering and detail model painting for shaky hands joints. Can choose between having a lid or leave it open. Open option gives you more range of motion.

Print setting

PLA+
0.4 Nozzle
0.2 Layer Height
15% infill, bigger hand may prefer more infill/weight.

Notes

No Support needed, see picture for orientation of models. Make sure lay shaft flat. Can replace shaft with metal M8 screw for more stiffness.
Adjust length by adjusting screw in amount or cut off the shaft as needed
Added hand tight nuts as needed. Can add to bottom of handle and/or top of ball to help fix the length. Likely not needed if your printer prints dimensionally correct. 
Can add grease before assemble to increase smoothness. Feels ok to me without grease