Eibos X 系列 Voron 2.4 安装模块

Eibos X Series Voron2.4 Mount

2024-04-02 07:03:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Eibos X series filamnent dryer mount for the Voron printers (and others but untested).

I wanted something sturdy and is rigidly mounted to the printer, that I did not have to worry about bending or buckling.

Position and mount the top truss central to the Eibos box. Filament exit hole should be clear and the rear truss hard down onto the power socket surround (see pic) to allow for filament hole clearance.

There is 10-12mm cleance between the Eibox box and the printer side panel to allow for the Eibos fan intake.

I have the power to the Eibos box controlled via a Sonoff Basic R1 with Tasmota flashed to it.

On a side note additional feature... I will be also adding a themister that I will be connected to the MCU that keeps the temp and possibly turns the Eibos dryer on and off as desired. Yet to do this though, but will keep thopse of you interested posted.

BOM
4/ M5x16 Button head bolts
4/ M5 T nuts
12/ M3.9x10mm Pan Head Self tapping Wood Screw (Cross)

Print with ABS+ (recommended) 40% cubic infill, 4 Walls, 4 Top & bottom layers.