奇迪科技 Q1 Pro 出料模块发布升级版

Qidi Tech Q1 Pro extruder release mod

2024-04-02 04:53:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For some reason they didn't include one in stock form. Maybe to make the printer more bamboooo like

print the lever. use a stiff filament and make it solid. I'm currently using PLA. If that doesn't work I'll update this. Something like PC would work great, and if you're looking at Q1 mods, you can print PC

the shafts are 3mm. Either print the 3mm version and drill/ream to size or print the oversized versions.

you'll need to cut out part of the extruder. Don't cut the window all the way. Leave a 2mm lip at the bottom

If you don't want to do all that, there's another way to cold pull. Take the stock lever and trim the corner off like the picture shows. You'll still need to trim the extruder housing and outer cover, but about half as much compared to the external lever. Now you can stick a smallish screwdriver into the newly made notch and give it a twist. You filament will release