Lynx - 更短的车手撑支撑物

Lynx - Shorter Kickstand

2024-04-02 01:34:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A shorter kickstand replacement for the LeaperKim Lynx.

The stock kickstand of the Lynx is pretty long, for most riders this is not a problem but for advanced riders who like to do technical off-road or playing around int he Skatepark the kickstand risks hitting when you do a drop.

This kickstand is about 2cm shorter than the stock kickstand and is supposed to be printed in TPU thus minimizing the risk if getting hit in the first place and also minimizing the consequence if that would happen since it will be flexible.

One could also just remove the stock kickstand but then there is nothing to protect the mudguard in case wheel is dropped on the side and mudguard can easily break.

The kickstand still functions as a kickstand although the wheel will be resting even lower since the kickstand is shorter.

Print in TPU95A aligned as per the STL.

I print with a 0.6 nozzle and layer height 0.3mm, layer width 0.62mm.

3 Walls (0.6 x 3 = 1.8mm)
3 Top/Bottom layers (0.3 x 3 = 0.9mm)
Infill 10% Cubic
Tree Supports

Install using the same screws from the stock kickstand.