1987至1992款Mk3版Soarer车型的加热管与火墙固定件

1987-1992 Mk3 Supra Heater Hose Firewall Clip

2024-03-31 22:23:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Firewall Clip I Made To Run Heater Core Hose Under The Lip On My Mk3 Supra LS Swap.

These Clips Are Designed To Run 5/8 Heater Hose Along the Under Side Of The Firewall Lip On 1987-1992 Mk3 Supras. This Part May Work For Other Models But Is Not Guaranteed.

Zip Tie Mounting Hole For Hose Is 4mm x 1.5mm, Its Not Necessary But When In Rome Make It Cleaner
Additional Zip Tie Hole Added To Run Any Additional Wiring Along This

These Bite The Firewall Lip QUITE Well, Gently Wiggle Up And Down Until It Snaps Into Place. DO NOT SMACK ON, Trust Me It Breaks. To Remove Wiggle Again But Mostly Downward.

Once Attached It Can Be Slide Along The Firewall For Perfect Placement. BE CAREFUL Firewall Edge May Be Sharp.

It Took 3 Of These To Span The Length Of My Firewall To What I Wanted

Printed In PETG, Im Expecting Engine Temps To Warp That This Summer, Then Ill Print In Fireproof ABS.

I Also Have Custom Wiring Clips For MK3 Supra LS Swaps