飞机罗盘模拟器3D模型

Airplane compass for flight simulator

2024-03-29 02:58:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replica of a compass as you can find in every aircraft. It is designed to be used with a NEMA 17 stepper motor (like this one : https://amzn.eu/d/48ZMKHg) and with a digital sensor (like these : https://amzn.eu/d/fukfElb). The PDF is the background to be printed and glued to the turning disc.

I will use it connected to a stepper driver shield for an Arduino Uno. I plan on using it for DCS World through the use of DCS Bios.

To assemble the different parts you will need 5 M3 screws for the stepper motor (M3x5mm) and the digital sensor, 4 M3 screws (M3x10 mm) to attach the front plane to the spacers, 4 spacers (20 mm, M3) and four nuts (M3) to attch the spacers to the motor support.