2280规格M.2 SSD外壳
Case for M.2 SSD (size: 2280)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I am using serveral M.2 SSDs to clone and backup my computers. For storage and protection I designed a simple M.2 case. This case fits a single M.2 SSD in the very common 2280 size.
Printing is easy. Use your favourite material and set your slicer to vase mode. The line width (default and outer wall) for a 0.4mm nozzle must be 0.6mm otherwise it will not fit. Use five bottoms and print it slowly to have a nice finish. Having a brim will optimze the bed adhesion. As shown in the photos I am using crystal clear PLA (Geeetech) so I can see what is in the case.
If you think that the case is too small just scale it in the slicer to match you needs.
Tags
License
Case for M.2 SSD (size: 2280)
by blecheimer is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Raspberry Pi外壳2023-03-27 -
WaS_UK_N-class_destroyer2023-05-17 -
可互换的米老鼠耳朵2023-06-24 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09 -
自行车钥匙扣2024-01-05
最热下载
-
Makita 10.8V 钻具与电池组2023-04-07 -
佳能EOS镜头连接接口2024-01-11 -
管道旋转过滤器（160mm）2024-03-19 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
HGX lite v2支架2025-07-18 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
