模拟赛车车顶滚动保护架

Sim Racing Roof Roll Cage

2024-03-22 07:10:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hey Guys,

Here is my contribution to the sim racing community. I designed roof roll cage fittings that are meant to be joined using schedule 40, 1 inch, PVC tubing and self supported by hooks that hang from your monitors. The fitting hooks can accommodate monitors an inch in thickness at the top of the monitor.

The design was done in inches (I'm an aviation engineer so all my software is in inches). To do this either scale proportionally by 2540% or change the settings in your slicer. It is recommended to print these hook facing upwards such that any support material will be on top of the rig, not in view of the driver.

This design is for a 127/53 degree monitor angle with plans to add additional more common angles as i receive user feedback.

Please leave comments and feedback!