电源插座盖

Power Outlet Cover

2024-03-21 09:49:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Thanks so much @cvmichael for the original model, it is a nice shape and economical design. I made some adjustments for functionality, and use a bit less filament.

On the baseplate, the prongs were merged with the baseplate. This prints best with snug supports. I have made a working example using no supports, with minor deformations on the two overhangs.

The bottom and side wire holes are enlarged, and the plate is adjusted as well to accommodate the larger gaps.

The MK2 files keep the same shape as the original model, and are not as refined as the MK3 models. The MK3 version also has the latch hole size increased slightly and a flat end to print upside down easily without supports.

I have been printing using PETG, PLA is probably durable enough as well.

Please make note: The product and designs included may not comply with safety, fire, legal, or other requirements in your locale. Use the models provided at your own risk.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament brand:
Creality
Filament color:
White
Filament material:
PETG
Notes:
It can be done with no supports, with some deformation on the base plate prongs.

Post-Printing

Filing

Some filing on the prong holes is necessary if using the MK2 top. Sorry, I'm learning fusion 360 and fixing this was giving me some issues! it was corrected in the MK3 version.