基础投掷器

Basic Slingshot/Catapult

2024-03-18 10:02:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

About This File

This is a basic slingshot frame that is easy to print and very functional. I recommend sanding the frame to eliminate any roughness so it is smooth all over and the edges are well rounded. There are grooves on the forks for locking the bands in place for both OTT and TTF configurations.

_{Disclaimer: Slingshots Are Dangerous!}
_{The file provided here is intended for educational and informational purposes only. Slingshots are not toys and should be handled with caution and responsibility. This slingshot is experimental and any use of this slingshot frame is at your own risk. I, as the provider of this file do not assume any liability for any consequences arising from such use.}

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
60%
Filament brand:
Aceaddity
Filament color:
Green
Filament material:
PLA+ 1.75mm
Notes:
Sliced with Cura using the standard quality preset. Changed wall thickness to 2.4mm and set the infill to 60% for additional strength.