ESP8266微控制器外壳

ESP8266 MCU case

2024-03-15 03:57:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This case holds an ESP8266 MCU development board and allows the case to be held by the 5v AC adaptor that powers the MCU.
You can drill holes and run wires of your choosing to temperature probes or split coil sensors or radar movement sensors. It's up to you.
I have used this basic case for many projects.
It is simple to print and modifiable for the project.
Almost any small screws can hold to lid on, I normally just use something out of my junk box.
There is a version that hangs from a normal wall plug, I have called that Vertical and a version that hangs down from a wall plug that is installed horizontally.

The one in these pictures is vertical and has a plug for a split coil sensor and a wire out to a radar RCWL-0516 sensor and I drilled a hole in the lid so that the on-board LED can be seen to light up when the RCWL sensor picks up something.

I bought some shorty micro usb cables from amazon to make it neater.