最终级旋翼发射器多用途适配器

Ultimate Propeller Launcher Multi Adaptor

2024-03-13 17:38:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have very much enjoyed making and experimenting (playing) with this propeller launcher.

I have used almost no skill or effort to combine the two main adaptors so that you can use one or the other or both at once! This is achieved at the cost of having to print using support, where the original design was support free.

I'll try to link all the files that I have used but all glory to https://www.thingiverse.com/NikoKun for his design.

Main file - https://www.thingiverse.com/thing:6412255

Adaptor for alternative propellers - https://www.thingiverse.com/thing:6442246

Actual alternative propellers - https://www.thingiverse.com/thing:51489

Even more propellers can be found by following the rabbit hole of remixes..

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament brand:
Whatever is cheap
Filament material:
ABS
Notes:
Low infill but decent wall count, depending on your chosen material...

License

CC BY-NC-SA

Ultimate Propeller Launcher Multi Adaptor
by InspMorse is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

最终级旋翼发射器多用途适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型