AtomRC剑鱼标准尾巴
AtomRC Swordfish Standard Tail
2024-02-04 13:09:56
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
AtomRC Swordfish Standard Tail
Print everything 0% infill except for Outer Stabilizer, Elevators, and Inner Mount.
Outer Stabilizer/Elevators - 10%
Inner mount - I went 15%, but you can do more. ADD 10-15 bottom layers for inner mount!
Bolt Inner mounts together through factory holes using M2 bolts.
Elevators are glued to a 3mm carbon rod. Make sure they're aligned when you glue them, you've got 1 shot!
V Stab is hinged with either CA hinge material, or if you're cheap like me you can just cut some tyvek mailer edges (you'll need to double it up) and CA them in there.
Still a work in progress, updates may come.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
压缩袋真空适配器2023-03-27 -
Raspberry Pi外壳2023-03-27 -
Wled控制器箱2023-08-25 -
头发修剪架2024-01-10
最热下载
-
佳能EOS镜头连接接口2024-01-11 -
管道旋转过滤器（160mm）2024-03-19 -
手指机器人MX版2024-04-14 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
